🌈 ESP32-S3 Rainbow: ZX Spectrum Emulator Board! Get it on Crowd Supply →
View All Posts
read
Want to keep up to date with the latest posts and videos? Subscribe to the newsletter
HELP SUPPORT MY WORK: If you're feeling flush then please stop by Patreon Or you can make a one off donation via ko-fi

I’ve built a web-based serial plotter that makes visualizing data from Arduino, ESP32, and other microcontroller projects much easier. No drivers, no installations - just open your browser and start plotting!

I’ve been messing aroumd with the Web Serial APIs for a while now and got to thinking - why don’t I make a better Serial Plotter?

You can try it out here: Web Serial Plotter

There are some limitations on some browsers, but it should work in Chrome, Edge, and Opera - you can checkout exact browser support here.

It should work the same was as the Arduino Serial Plotter, so you can just output your data in a comma separated list and it will plot it on the graph.

# Optional header defines series names
# time(ms), ax, ay, az
0, 0.01, 0.02, 0.98
10, 0.02, 0.01, 0.99
20, 0.03, 0.00, 1.01

I’ve added a simple signal generator to the plotter, so you can test it without any hardware.

The built-in signal generator lets you test the plotter without any hardware:

  1. Use the generator panel in the header
  2. Choose signal type: Sine (phased), Noise, or Ramp
  3. Adjust sample rate and click “Start”
  4. Data will appear as if from a real device

Open Source & Contributing

The Web Serial Plotter is open source under the GPL v3.0 license. The complete source code is available on GitHub, and I welcome contributions, issues, and feature requests.

Related Posts

The six stages of debugging - ESP32 Debugging - Every dev knows the six stages of debugging—from 'That can't happen' to 'How did this ever work?' On embedded projects I’ve lived on Serial.println and blinking LEDs, but modern ESP32s have built‑in USB/JTAG so you can set breakpoints, step through code, and inspect variables right in the Arduino IDE. In the video, I show how to jump faster from 'Why does that happen?' to 'Oh, I see.'
This number does nothing - Ever wondered about the ubiquitous 'Serial.begin(115200);' in your Arduino projects? It turns out, with boards like the ESP32-S3 offering native USB support, this baud rate doesn't really matter when streaming data. My tests even showed surprising results with different speeds using Arduino and ESP-IDF, highlighting potential in USB full-speed capabilities. I dove into raw performance testing, and saw deviations from expected UART limits. Check out the full video and explore the results if you're curious about maximizing your data transfer speeds!
ESP32-S3 Hardware SPI on the Adafruit ST7789 - I've had some commenters point out the issue with the slow display updates in my recent Arduino Nano ESP32 video. It turns out, the software SPI of the Adafruit_ST7789 library was the culprit. Lo and behold, the solution is simple - using the hardware SPI constructor of the library. Apparently, this isn't well documented, so I wrote some code to serve as reference for myself and others who might run into the same snags. Trust me, the difference in speed is absolutely bonkers. Check out the video to see the magic in action.
Vibing a PCB - surprisingly good - In my latest adventure, I challenged AI to design a working ESP32-S3 development board from scratch using Atopile and Claude. The idea was as simple as vibe-coding actual hardware without diving into the code. It was a chaotic yet fascinating journey, with some misses like unwired components and a forgotten capacitor. After a few prompts, the AI delivered a surprisingly functional board featuring USB-C, an AMS1117 regulator, and status LEDs. While not yet perfect, vibe-coding feels like a glimpse into the future of hardware design.
Minimalist Microcontroller: Building a Bare-Bones Dev Board - In a thrilling DIY endeavour, I attempted to build the most minimalist ESP32 dev board possible. Diving deep into the schematic of the ESP32 S3 WROOM module, I chopped out the non-essentials and whittled our needs down to bare bones. The experiment saw me juggling USB data lines and voltage regulators, waving goodbye to an array of capacitors and connectors and boldly embracing the simplicity of direct connections. Despite a few hitches, the miniature Frankenboard came alive, proving that sometimes less is more...at least in the world of microcontrollers.

Related Videos

Forget the Arduino Serial Plotter - try this instead! - Hey everyone! So, you're probably familiar with the Arduino serial plotter, right? It's useful for basic stuff, but I wanted something better, more cross-platform, and runs right in the browser. Enter the web serial plotter, using the web serial API! It's super flexible with zoom, export options, and light/dark mode. You can even pan through history or switch to absolute time. Plus, it's all secure and runs locally. It's open source, and I'd love your contributions or bug reports on GitHub. It's still a work in progress, but I think you'll find it pretty handy!
Live GPIO Viewer - In my latest discovery, I found an incredibly efficient visualization tool from the last outpost workshop that upgrades how I check the status of the GPIO pins on my ESP32. It's super simple to use and allows me to monitor pin activities directly. I set up a couple of LEDs and a button on various GPIO pins to demonstrate its effectiveness and the results were fantastic. Although it currently supports only digital input and output and PWM, I'm optimistic it will expand with time. Thanks to the open-source community, you can find the setup instructions in a GitHub repo. This tool is a revelation and I highly recommend it.
Stop Using printf() - Debug ESP32 the Right Way - Right, let’s give this a go. Instead of drowning in printf()s and blinking LEDs, I show how the ESP32-S3’s built‑in USB JTAG lets you hit Debug in the Arduino IDE (or PlatformIO) and actually step through code. We set breakpoints, add watch expressions, use conditional breakpoints, and even edit variables live with a simple FizzBuzz/LED demo. It’s quick, it works, and it beats “works on my machine”—just mind real‑time code and ISRs. Works on ESP32s with native USB.
Level Shifter Circuit - simulation and real world test. - Hey there! If you're around my age, you'll probably get nostalgic over the sound of old school tape loading on the ZX Spectrum. I took a deep dive into how the data loads, using my oscilloscope to break it all down, and even built a circuit to handle the signal for my ESP32. Throw in some cool simulations using CircuitLab, and I'm all set! Plus, I discovered a neat trick using diodes to perfect the signal. Hands-on and really quite fun!
I Feel the Need – The Need for Hardware SPI… - An insightful iteration on my Arduino Nano esp32 video. Despite criticism regarding the slow display update speed, a solution was found thanks to the helpful fellow, Nick. Turns out, the software SPI was the cause of the issue. A quick tweak in the code and voilà, we've got ourselves an SPI clock whizzing at 80 megahertz. Quite the speed boost for just a few lines of code alteration!
HELP SUPPORT MY WORK: If you're feeling flush then please stop by Patreon Or you can make a one off donation via ko-fi
Want to keep up to date with the latest posts and videos? Subscribe to the newsletter
Blog Logo

Chris Greening


Published

> Image

atomic14

A collection of slightly mad projects, instructive/educational videos, and generally interesting stuff. Building projects around the Arduino and ESP32 platforms - we'll be exploring AI, Computer Vision, Audio, 3D Printing - it may get a bit eclectic...

View All Posts